Information
 
MY QUOTE BOX
0 items
 
Brands
 
 

 


 


 


 


 

 

 


 

 

 

 

 

 

 


 

 

Scorpion Brushless Motor

Get To Know “SCORPION BRUSHLESS MOTOR”

WHAT IS SCORPION MOTORS?
Scorpion Competition Series Brushless Motors are built from the best materials available, and are designed to provide both quality and performance at an affordable price. Scorpion starts with high quality aluminum alloy parts that are produced on the latest CNC milling machines. These parts are then gold anodized to provide a beautiful, long-lasting finish. The stators are made with 0.2mm laminations to give maximum efficiency, and minimum Eddy current losses. The stators are epoxy coated to prevent shorts, and are wound with wire that is rated at 180 degrees C (356 F). The magnets used in Scorpion Motors are rated for operation at 200 degrees C (392 F), making a motor that is virtually impossible to burn up in normal use.

Scorpion Motors are built to last, and are backed with a 2-Year warranty against defects in materials or workmanship. However, due to the high RPM of these motors, and the fact that we cannot control the installation and setup, the bearings are not covered by the 2-Year warranty, nor is any subsequent damage caused to the motor by a bearing failure. Bearings are a normal wear item, and as such, need to be maintained and changed periodically. For maximum life, make sure that a sufficient gap is left between the pinion and main gear during motor installation to avoid binding, and put a small drop of oil on each bearing every 5-6 flights. It is the responsibility of the pilot to ensure that the bearings are maintained properly.

S22 SERIES

Optional accessories: S22 Series Shaft Kits / Bearing Kits / Motor Mounts

All Scorpion 22mm motors come with 3.5mm male Bullet style connectors already attached, and include a complete hardware package that contains the following: 3 matching female Bullet connectors for your speed controller, a cross style backplate mount with 4 screws, a wobbly type prop adapter with 2 O-rings for GWS style props, and a 5mm threaded shaft prop adapter for APC style props.

View S22 Series Technical Description

http://www.scorpionsystem.com/files/i1,801_full_dimension.pdf

HK22 SERIES

Optional accessories: HK22 Series Shaft Kits / Bearing Kits / Motor Mounts

All Scorpion HK Series 22mm motors come with 3.5mm male Bullet style connectors already attached, and include a hardware package that contains 3 matching female Bullet connectors for your speed controller, heatshrink to cover the bullet connectors and mounting screws. Since the HK series motors are primarily designed for Helicopter and Ducted Fan use, they do not include a prop adapter. This motor is specifically designed for the newer micro helicopters, such as the T250, that requires 2.5mm output shaft.

View HK22 Series Technical Description

http://www.scorpionsystem.com/files/i1,124_full_dimension.pdf

HK30 SERIES

Optional accessories: HK30 Series Shaft Kits

The Scorpion HK-3026 motors have been developed for the newer 500 and 550 class electric helicopters that are becoming so popular. These motors are designed to provide all the power that you can use, while still maintaining excellent efficiency and cool running characteristics.

All Scorpion HK-3026 series motors come with 4mm male Bullet style connectors already attached, and include a hardware package that contains 3 matching female Bullet connectors for your speed controller with matching heat shrink tubing. Since the HK series motors are primarily designed for Helicopter and Ducted Fan use, they do not include a prop adapter. If you intend on running a prop on this motor, you will need to purchase a prop adapter for a 5mm shaft.

View HK30 Series Technical Description

http://www.scorpionsystem.com/files/i1,192_full_dimension.pdf

S30-II SERIES (V2)

Optional accessories: S30 Series Shaft Kits / Bearing Kits / Motor Mounts

All Scorpion SII-30mm motors come with Scorpion’s new 2.5mm male Bullet style connectors already attached, and include a complete hardware package that contains the following: 3 matching female Bullet connectors for your speed controller, a cross style backplate mount with 4 screws, and a threaded shaft prop adapter.

View S30-II Series V2 Technical Description

http://www.scorpionsystem.com/files/i1,216_full_dimension.pdf

S40 SERIES

Optional accessories: S40 Series Shaft Kits / Bearing Kits / Motor Mounts

All Scorpion 40mm motors come with pre-tinned power leads that are ready for your favorite style connector, and include a complete hardware package that contains a cross style backplate mount with 4 screws, and threaded shaft prop adapter.

View S40 Series Technical Description

http://www.scorpionsystem.com/files/i1,186_full_dimension.pdf

HK40 SERIES

The Scorpion HK-4020 motors have been developed for the newer 550 class electric helicopters such as Logo 500 with 550mm blade helicopter that are now coming onto the market. These motors are designed to provide all the power that you can use, while still maintaining excellent efficiency and cool running characteristics. All Scorpion HK-4020 series motors come with 4mm male Bullet style connectors already attached, and include a hardware package that contains 3 matching female Bullet connectors for your speed controller with matching heat shrink tubing. For maximum strength, the Scorpion HK-4020 series motors feature an 8mm motor shaft that is ground down to a 5mm diameter at the output end to fit standard size pinion gears. Since the HK series motors are primarily designed for Helicopter and Ducted Fan use, they do not include a prop adapter. If you intend on running a prop on this motor, you will need to purchase a prop adapter for a 5mm shaft.

View HK40 Series Technical Description

http://www.scorpionsystem.com/files/i1,206_full_dimension.pdf

S55 SERIES

All Scorpion 55mm motors come with 4.0mm male bullet style connectors already attached, and include a complete hardware package that contains the following: 3 matching female Bullet connectors for your speed controller, a cross style backplate mount with 4 screws, a thrust washer with tapered collar, a spacer collar that allow you to move the prop forward if needed, a heavy duty prop washer, a prop nut and two prop lock nuts that have threaded tips for use with a spinner.

View S55 Series Technical Description

http://www.scorpionsystem.com/files/i1,228_full_dimension.pdf